FABRICATION

We fabricate the "Out of the ordinary"

We offer a bespoke fabrication service in order to give our customers exactly what they need.  So if you need something out of the ordinary, give us a call with your specific requirements.  We will work closely with our customers to understand their requirements, before we apply our decades of knowledge to help solve your issues and meet your needs.

0161 241 0553
We love what we do and it shows. With more than 30 years of experience in the field, we know our industry like the back of our hands. There’s no challenge too big or too small and we dedicate our utmost energy to every project we take on.

WHAT WE CAN DO

After initial talks, to discuss your needs we'll get our engineers on the job.  We can offer a range of in-house fabrication services to get you the product that you need. Some of our in-house fabrication services include

Socket Fusion

Rod Welding

Cutting

Lathing

Solvent Welding

Technical Drawing

CNC Machining

Engineering


Consultation

During initial talks or email discussions with our engineers, we can discuss the requirements and final application to build a picture of how we can help.

Expert Team

Your project will be handled by experts in material mechanics. We make sure you have the most experienced professionals working for you. 

Quality

You’ll find the support you need to make sure that things runs smoothly. We’re here to help you with any questions.

Previous Fabrication Work we have Performed for Our Clients

Below you will find a little case study of how we managed to help one of our clients with the use of our fabrication services.

Fabricated Industrial 'Y Piece' Components

How we did it


Main Unit Body

The main body of the 'Y piece' pipe component consists of 160mm diameter PVC-U pipe with a 225mm diameter pipe intersecting at 45 degrees.  Cuts were engineered in the 160mm pipe to allow the 225mm pipe to perfectly intersect the 160mm.  The intersecting end of the 225mm pipe was fitted with a plate to channel the piped media into the 160mm without spillage.  The assembly was then rod welded for strength, durability and pressure-resistance.


Flanged Ends

The ends of the 160mm diameter pipe have off-the-shelf stub flanges solvent welded on to them, which allow the unit be bolted on to the clients existing pipework installation with the use of gaskets and the integrated backing rings. 


Backing Rings

The backing rings in the pictures are all machined to the client's specific requirements from 30mm thick UPVC material.  Off-the-shelf backing rings generally aren't available in 30mm thick, which was a specific requirement from the client for extra strength.  The two rings on either end of the 160mm pipe are machined to NP16 drill standard, basically so the bolts will align with what is already installed, which are of a standard NP16 bolt specification.  The backing ring on the 225mm pipe section is machined with the holes in a non-standard bolting specification for their bespoke requirements and welded directly on to the 'Y' component as a rigid flange to be bolted directly onto client's existing machine


Clients Requirements

Our client received a bespoke component that matched their needs perfectly and was able to be bolted directly into the their existing pipework installation with ease. The client was so pleased with the outcome of our fabricated component, that we have since been commissioned again and completed a further five; shown in the image ready to be dispatched.

To discuss your requirements, give us a call

0161 241 0553