• Body Material: uPVC • Double Union • BSP Female Thread Ends • EPDM Seals Designed to be connected to components with 1" BSP Male Thread.
WRAS Approved: Any water fitting, which when installed, will carry or receive water from the public mains water supply in the UK, must comply with the Water Supply (Water Fittings) Regulations or Scottish Byelaws. These require that a water fitting should not cause waste, misuse, undue consumption or contamination of the water supply and must be ‘of an appropriate quality and standard’.
Thermal Properties
PVC-U shows very good characteristics in the temperature range from 0°C to +60°C. At lower temperatures the impact strength drops considerably. For further information about pipes & fittings please click on our Tech Talk
BSP Thread The valve has 1" female BSP thread on both ends, to enable connection to components with a 1" male BSP thread. The use of PTFE tape should help ensure a pressure resistant joint.
Please Note:
We offer TP & Effast valves, which are different brands. Both brands are of equivalent specification and quality. We will send the brand that enables us to dispatch your order in the quickest time possible. If, however, you would prefer a specific brand, then please let us know in order comments and we will ensure you receive your chosen brand, but this may delay dispatch if your order is for larger quantities. We do not send a mixture of brands to complete a single order.
