• Metric Size • Reduces Diameter • Plain Fitting • Material: Rigid UPVC Plastic • Reducing Coupler • Colour: Grey Designed to be used with 110mm OD PVC-U Pressure Pipe.
WRAS Approve
d: Any water fitting, which when installed, will carry or receive water from the public mains water supply in the UK, must comply with the Water Supply (Water Fittings) Regulations or Scottish Byelaws. These require that a water fitting should not cause waste, misuse, undue consumption or contamination of the water supply and must be ‘of an appropriate quality and standard’.
Thermal Properties PVC-U shows very good characteristics in the temperature range from 0 to 60 Degrees. At lower temperatures the impact strength drops considerably. For further information about pipes & fittings please click on our Tech Talk
Plain ends for solvent cement fitting Pressure Rating: 16 Bar
Dual function:
Inner diameter
of the large end is used to reduce from a 110mm pipe
to a smaller 63mm pipe. Outer diameter
of the large end can be used as a bush to reduce from 125mm fitting
or valve to a 63mm pipe.
