• Material: Rigid PVCU Plastic • Reduces Diameter • Metric Size • Plain Fitting • Colour: Grey Designed to be used with 110mm OD PVC-U Pressure Pipe.
WRAS Approve
d: Any water fitting, which when installed, will carry or receive water from the public mains water supply in the UK, must comply with the Water Supply (Water Fittings) Regulations or Scottish Byelaws. These require that a water fitting should not cause waste, misuse, undue consumption or contamination of the water supply and must be ‘of an appropriate quality and standard’.
Thermal Properties PVC-U shows very good characteristics in the temperature range from 0 to 60 Degrees. At lower temperatures the impact strength drops considerably. For further information about pipes & fittings please click on our Tech Talk
Pressure Rated: 16 Bar Plain for solvent cement jointing. Reduces the inner diameter of 110 mm PVC pipe fittings or valves, so that smaller 50mm PVC pipe can be connected. The reducer should be bonded to the inside of the fitting aperture with the use of solvent cement.
