40mm Plasson® End Plug Compression Fitting 7120

Trusted PLASSON® Brand. WRAS & KIWA Approved
Cap off the end of a 40mm pipe length.
Pressure rated upto 16 Bar

• Body Material: Polypropylene
• Easy Installation without the need for fusion or solvent cement
• Proven long term performance

The inner O-ring is positioned in a special groove machined into the inside of the body of each end plug, the PLASSON® O-ring is always in the optimum position for sealing.

This innovative design means the fitting seals water-tight as soon as the pipe passes through the O-ring. With PLASSON® compression fittings, the tightening of the nut prevents the pipe and fitting from moving apart, or blowing out, under pressure. The design also means the O-Ring can’t fall out and be damaged, contaminated or lost during installation.