63 x 32 x 63mm Plasson® 90° Reducing Tee Compression Fitting 7340

Trusted PLASSON® Brand. WRAS & KIWA Approved
Connect two lengths of 63mm pipe together with 32mm pipe branching off at a 90° angle.
Pressure rated upto 16 Bar

• Body Material: Polypropylene
• Easy Installation without the need for fusion or solvent cement
• Proven long term performance

The inner O-rings are positioned in special grooves machined into the inside of each fitting, the PLASSON® O-ring is always in the optimum position for sealing.

This innovative design means the fitting seals water-tight as soon as the pipe passes through the O-ring. With PLASSON® compression fittings, the tightening of the nut prevents the pipe and fitting from moving apart, or blowing out, under pressure. The design also means the O-Ring can’t fall out and be damaged, contaminated or lost during installation.