90mm X 110mm X 3" PVC-U Adaptor Plain / M Thread

• Metric to Imperial Conversion • Plain to BSP Male Thread Conversion • Material: UPVC
Designed to be used with 90mm OD PVC-U Pressure Pipe and Fittings.

WRAS Approve d: Any water fitting, which when installed, will carry or receive water from the public mains water supply in the UK, must comply with the Water Supply (Water Fittings) Regulations or Scottish Byelaws. These require that a water fitting should not cause waste, misuse, undue consumption or contamination of the water supply and must be ‘of an appropriate quality and standard’.

Thermal Properties
PVC-U shows very good characteristics in the temperature range from 0 to 60 Degrees.
At lower temperatures the impact strength drops considerably.
For further information about pipes & fittings please click on our Tech Talk

This adaptor is plain on one end for solvent cement bonding and has a Male BSP thread enabling the connection to a 3" female BSP threaded fitting.

Dual function:
Inner diameter of the adaptor's plain end can be used to connect onto metric pvc pipe with a 90mm outer diameter.
Outer diameter of the adaptor's plain end can be used to connect to a 110mm pvc plain fitting.